Weathering Your Sprinkler System


Weathering Your Sprinkler System

Det Àr viktigt att vinterisera och vÀderbetyta ditt sprinklersystem innan de första fryssatserna uppstÄr och skador uppstÄr. SkÀl att vinterisera Om vatten lÀmnas i sprinklersystemens rör, dÄ det fryser - och det kommer i ett kallt klimat - kommer de underjordiska rören att expandera med vattnet och sÄ smÄningom explodera.


Det Àr viktigt att vinterisera och vÀderbetyta ditt sprinklersystem innan de första fryssatserna uppstÄr och skador uppstÄr.

SkÀl att vinterisera

Om vatten lÀmnas i sprinklersystemens rör, dÄ det fryser - och det kommer i ett kallt klimat - kommer de underjordiska rören att expandera med vattnet och sÄ smÄningom explodera. Detta kommer att leda till skador pÄ hela ditt sprinklersystem och kan behöva dra hela systemet ur marken för att ersÀtta det. Det hÀr Àr inte bara nödvÀndigt, men det kan ocksÄ vara mycket dyrt.

Vinteraktiviteter

Tömning av vattnet frÄn ditt sprinklersystem rÀcker inte för att förhindra eventuell frysning och skador pÄ vattenrör. För att fullstÀndigt vinterisera systemet mÄste du blÄsa systemet klart av allt vatten. Detta kan göras genom att manuellt tömma systemet och sedan anvÀnda en luftkompressor för att helt ta bort eventuellt kvarvarande vatten.

Om du aldrig tidigare anvÀnt en luftkompressor för att vinterisera ett sprinklersystem Àr det en bra idé att fÄ hjÀlp av nÄgon som har gjort denna Ärliga sysselsÀttning. En erfaren person kan ge vÀgledning vid anvÀndning av kompressorn sÄ att du inte skadar ditt sprinklersystem.

Weathering Your Sprinkler System

FAQ - 💬

❓ Can you blowout your own sprinklers?

👉 Blow Out the Line Disconnect the hose as soon as they run dry. You'll notice the sprinkler heads spitting and misting. Don't overdo the blowout—without water cooling the plastic gears, they can melt. Once you're done move on to the next zone and allow the heads to cool.

❓ Do you need to blowout your sprinkler system?

👉 Most lawn sprinkler developers recommend the air blow out system to winterize an irrigation system. Forcing air through the valves, pipes and sprinkler heads completely rids the system of water. If you're a DIY'er, you'll need an air compressor that's able to put out the right air volume and pressure at the same time.

❓ Can I turn on my sprinkler system myself?

👉 Some homeowners count on a lawn service or irrigation contractor to winterize the system in the fall and turn it back on in the spring, but there is no reason to pay for this service, as it's very easy to do yourself in just a matter of minutes.

❓ How do I flush my irrigation system?

👉 STEP 2: Flush the system

  1. Use a flush cap to flush the system from debris. ...
  2. It's easier to pull the riser up before refitting your nozzle/flush cap.
  3. Screw on the flush cap.
  4. Run for 15-20 seconds.
  5. Flush all of your other sprinklers one by one, or with multiple flush caps at one time.

❓ What size of air compressor do I need to blowout a sprinkler?

👉 The minimum volume an air compressor must be able to provide to properly blowout an irrigation system is 20 cubic feet per meter (CFM). Still, many professionals recommend up to 50 CFM at under 50 PSI for optimal performance, assuming the water lines are less than an inch in diameter.

❓ What PSI Do I need to winterize my sprinkler system?

👉 This will result in the remaining water draining into low spots and subjecting the system to freeze damage. Ideal pressures are in the range of 40 to 80 pounds per square inch (psi) for the air compressor with 80 psi being the maximum for rigid PVC pipe and 50 psi for polyethylene pipe (flexible black pipe).

❓ How do I winterize my sprinkler system without blowing it out?

👉 Not all systems need to have the water blown out of them. You can winterize a sprinkler system without an air compressor if all of your irrigation lines are buried at a slight downhill slope. Simply shut off the main water supply to your system and open the drain valves at the end of each zone.

❓ How do I prepare my sprinkler system for winter?

👉 Steps for Winterizing Your Sprinkler System

  1. Step 1: Shut Off the Water. It will come as no surprise that the first step is turning off the water to the system with a main valve that's usually found near your water meter. ...
  2. Step 2: Turn Off the Timer. ...
  3. Step 3: Drain the Water. ...
  4. Step 4: Insulate Above-Ground Components.

❓ How do I start my sprinkler system after winter?

👉 Steps to turn on sprinkler system after wintering

  1. Find system's main shut-off valve. ...
  2. Find the vacuum breaker. ...
  3. Close the vacuum breaker test valves. ...
  4. Open the vacuum breaker's shut-off valves. ...
  5. Reinstall main valve bleeder cap (as needed). ...
  6. Slowly open the main valve. ...
  7. Test the system. ...
  8. Recheck the vacuum breaker and valves.

❓ How do I winterize my sprinkler system without a blowout?

👉 Not all systems need to have the water blown out of them. You can winterize a sprinkler system without an air compressor if all of your irrigation lines are buried at a slight downhill slope. Simply shut off the main water supply to your system and open the drain valves at the end of each zone.

❓ How do you get dirt out of sprinkler lines?

👉 1:281:56Fixing a Sprinkler Line Easily Remove Dirt

❓ Why winterize your sprinkler system?

👉 Why Winterize Your Sprinkler System (What’s the Worst that Could Happen?) Unlike almost all other liquids, water expands as it freezes. Therefore, a pipe that’s completely filled at 32 °F (0 °C) needs to get about 10% larger as its contents turn to ice – or else.

❓ How to install a sprinkler system?

👉 The first task is to flag the location of each sprinkler valve according to the sprinkler system design. Using different colored flags for each zone will help simplify the installation. Marking spray will show the exact location of where to dig the trenches. After turning off the water supply, dig up the main water line near the water meter.

❓ How do I winterize my irrigation system?

👉 When winterizing your irrigation system you will need a few tools and pieces of personal protective equipment (PPE). air compressor hose to the blow out port on your sprinkler system. We recommend one with a shut-off valve for better control of the airflow and to prevent the sprinkler heads from overheating.

❓ How do you fix low water pressure in sprinkler system?

👉 Some sprinkler systems contain special components that allow water to siphon away whenever the water pressure drops to something under 10 PSI. If you have one of these, simply: Run one of your sprinklers – it will squirt a little at first. Keep it on until it stops sucking in air.

Videoklipp Relaterade Artiklar: Winterizing your sprinkler system, irrigation system backflow freeze prevention - WATR NEWS.